L型冷凝器 L-type condenser

• 額定換熱量從1~70KW；翅片間距從1.8~3.5mm。

• 軸流風機有罩極式風機、外轉子式風機、內轉子式風機。

• 電壓有220V/50Hz和380V/50Hz。

• 采用優質鋼板，表面噴塑，外形美觀耐腐蝕。盤管采用銅管錯排方式、機械漲管與鋁片緊密貼合，換熱效率高。

• 每個產品出廠經過2.8MPa的氣密性實驗及系統排污處理。

• 均采用大風量、低轉速的電機，噪音小美觀大方，應用范圍廣。

• The rated heat transfer is from 1 to 70 KW, and the fin spacing is from 1.8 to 3.5 mm.

• Axial fan has hood pole fan, outer rotor fan and inner rotor fan.

• Voltages are 220V/50Hz or 380V/50Hz.

• It is made of high-quality steel plate with plastic-sprayed surface, beautiful appearance and corrosion resistance. The coil adopts the staggered arrangement of copper tubes, and the mechanical riser is closely connected with the aluminium sheet, so the heat transfer efficiency is high.

• Each product was discharged through 2.8 MPa air tightness test and system sewage treatment.

• They all adopt motors with large air volume and low speed. They have small noise, beautiful appearance and wide application range.